I've found out that the vendor also included a 1.14b version already on the USB drive. Just make sure your cartridges are less than 100% before you do this. You will need the Toolkit V1.0 to modify the 1.14B firmware for keeping your chips from counting down. Sit on your hands until it wakes back up!
![emcopy error 317 emcopy error 317](https://itsalllegit.files.wordpress.com/2018/03/google-chrome-detection-method.png)
#Emcopy error 317 update
When the update turns off the printer, be very patient! It takes a little while to wake back up after you are asked to push the button. 1.14B on your printer so you can use CubePrint 4.03. Just something to keep in mind going forward. Also note that prints from a USB drive will never allow 100% cartridges.
#Emcopy error 317 software
There is an internal software buffer that fills up over time where 100% cartridges will work, but it does require some time to have this activate. Please note that the modified firmware will not allow 100% cartridges (initialized).
![emcopy error 317 emcopy error 317](https://s3.manualzz.com/store/data/022051079_1-b36c3d690ba80b1d09c9274950e41076.png)
That is why it worked with the loaded firmware version. The sample print is a very old print file that is on the internal drive. I have made sample prints and still see 100% after printing one sample. The test print does not use much material. Someone did a nice work for making the printer functional for you. Thanks for the information on the hardware mod.
![emcopy error 317 emcopy error 317](https://tullyal.files.wordpress.com/2016/07/native-synchronous.png)
(I'm new to this forum too, so I don't know if those links will work for you!) SO i did not wanted to update the FW without asking, to avoid generating more problemsįollowing links to the photos. Since I was able to print the test print with this config and mi cartridges show still at 99% and 100% and both say PLA black, I'm assuming the hack is in place, but of course since I'm new to this I might be wrong. What country are in if I may ask?Hi! thanks a lot for your quick reply! attached you will find the modifyied cartridges and also de modifyied extruders(?). I am not certain of the hardware/physical modification you are referring too but now you have me curious if your could please explain. This is simply the version that the factory installed. This also suggests that the hack has not been installed. Most Cube3 printers are sent from the factory with v1.10 and require new firmware to be installed to use the latest version of CubePrint (4.03). The printer reports to the CubePrint application what version firmware is installed. There is a requirement in the Cube Print that a certain firmware level on the Cube3 printer is installed. Ld: 0711-317 ERROR: Undefined symbol: .Your issue is not too difficult. /exceptions/exceptions.a ./arrays/arrayslib.a. usr/vacpp/bin/xlC -qmaxmem=32768 -bnoipath -q64 -bmaxdata:0x80000000 -o mainCrvSimu -L/oracle_client/product/9.2.0.7/lib/ Curve.o ExpirationDates.o dbConnect.o PwrCurve.o Primar圜urves.o VaRConfig.o CurveLogReturn.o PwrCrvLogReturn.o vatrmain.o SimulatedCurve.o CurveSimulator.o SimuCurve.o BasisSimuCurve.o PwrSimuCurve.o PwrBasisSimuCurve.o HJM_model.o LogReturns.o.